Skip to content

Light Bulb Identifier and Finder Guide

This guide is for homeowners holding an unfamiliar bulb, dealing with faded markings, or trying to find a replacement that fits an existing lamp. It covers common household light bulb base sizes, shape codes, and the specifications that complete a match.

The old bulb looks ordinary until you try to replace it. One candidate has the right glass shape but a smaller screw base. Another fits the socket but is too tall for the shade. The most useful light bulb identifier is a method that separates these details before you shop.

To find a replacement light bulb, identify its base, voltage, shape, and dimensions first. Then match brightness, color, controls, and the fixture's operating requirements. Keep the old bulb until the replacement has been confirmed.

Light bulb identification setup beside an unplugged household table lamp
The old bulb, its markings, and the fixture label provide different pieces of the replacement puzzle.

Start With These Identification Checks

Turn the light off and let the bulb cool. Unplug a portable lamp before removing its bulb. Follow the fixture's removal instructions, particularly for recessed lamps and fittings with retaining rings.

  1. Read: Photograph every marking on the bulb and fixture label.
  2. Inspect: Identify screw threads, straight pins, loops, or twist-lock contacts.
  3. Measure: Record the base size, overall bulb length, and widest diameter.
  4. Confirm: Check voltage, actual wattage limits, controls, and enclosure requirements.
  5. Search: Use the verified specifications to narrow the replacements.

If the fixture contains an integrated LED module, look up its model before attempting removal. There may be no ordinary replaceable bulb.

Read the Bulb and Fixture Markings Together

Look around the base, the white housing above it, and the glass near the neck. A manufacturer name and model number can be more useful than a general description such as “small warm-white bulb.” Search that model on the manufacturer's website to find its specification sheet.

A hypothetical listing might read A19 / E26 / LED / 120V / 9W / 800 lm / 2700K / Dimmable. These fields describe the shape, base, technology, operating voltage, actual power, light output, color temperature, and dimming capability. They are separate specifications, even when printed together.

The fixture label has a different job: it tells you what the fixture accepts. An old bulb could have been installed incorrectly, so compare its markings with the fixture instructions. For replaceable-bulb table lamps, record any specified bulb type and maximum wattage before shopping.

For a broader explanation of lighting technologies and fittings, our light bulb types guide connects these terms to common household fixtures.

Light Bulb Base Sizes: Identify the Connection First

The base is the part that connects to the socket. A rounded bulb and a candle-shaped bulb can share a base, while two nearly identical glass shapes can have different connections.

For Edison screw bases, the number indicates nominal diameter in millimeters. An E12 light bulb base is approximately 12 mm across; an E26 light bulb base is approximately 26 mm. The following light bulb base diameter chart covers common identification candidates.

Common Screw-Base Sizes
Base Nominal Diameter Identification Clue
E12 12 mm Candelabra base; common in decorative fixtures
E14 14 mm Small Edison screw used in many international-market fixtures
E17 17 mm Intermediate base; larger than E12, smaller than E26
E26 26 mm Medium base; common in US household lighting
E27 27 mm Medium screw base common in other markets; confirm the specified fitting and voltage

“Standard light bulb base” usually refers to E26 in a US household context. It is a starting clue, rather than a complete specification. The Philips Hue size guide distinguishes the common E26, E27, E12, and E14 fittings.

Small candelabra and medium screw light bulb bases beside a metric ruler

Measure the Removed Bulb

Measure across the outside of the screw threads, rather than across the glass. A caliper can help distinguish close sizes; use a ruler for an initial estimate. Take measurements on the removed bulb, and keep measuring tools out of the socket.

E12 and E14 are different fittings. E26 and E27 are close in size, but physical similarity does not establish electrical compatibility. Confirm the specified base and rated voltage instead of relying on whether the bulb appears to screw in.

Recognize Pin and Twist-Lock Bases

With pin bases, record the contact shape and center-to-center spacing. The LEDVANCE base guide lists these common types:

  • G4: Two straight pins, nominally 4 mm apart.
  • GU5.3: Two straight pins, nominally 5.3 mm apart.
  • G9: Two loop-style contacts, nominally 9 mm apart.
  • GU10: Two short, enlarged-end pins, nominally 10 mm apart, that twist into the fitting.
  • GU24: A different twist-lock base with contacts nominally 24 mm apart.

Keep the entire code, including letters and suffixes. Similar pin spacing can appear in different base designs. Avoid bending pins or forcing a candidate into the socket.

Light Bulb Shapes and Sizes: Decode the Glass Outline

Shape codes describe the bulb body. In common US designations, the number represents nominal maximum diameter in eighths of an inch. A19 is 19 ÷ 8, or about 2.375 inches across. E26, by contrast, uses millimeters for the base.

That unit difference is easy to overlook: A19 and E26 can both describe the same bulb. Neither code tells you its total length. Some international designations use metric dimensions, so check the manufacturer's drawing when the naming convention is unclear.

Common Light Bulb Shape Codes
Code Recognizable Shape What to Check Next
A15, A19, A21 Familiar rounded household bulb Base, overall length, and shade clearance
B10, B11 Slender decorative candle or bullet profile Exact base and permitted dimensions
CA10 Decorative candle with a bent or flame-like tip Tip clearance inside glass shades
G25 Round globe Globe diameter and fixture opening
BR30 Broad reflector-style bulb Housing fit and light distribution
PAR30, PAR38 Reflector lamp with a defined front face Beam angle, neck length, and location rating
MR16 Compact reflector form, about 2 inches across Base and voltage separately
T8 Tubular form with a nominal 1-inch diameter Length, end connections, and electrical system

GE Lighting's shape guide explains these naming families. Treat the table as an identification aid; verify the replacement's actual dimensions before ordering.

A Candle Shape Still Needs a Base Check

For replaceable-bulb chandeliers, compare the bulb against the glass sleeve or shade as well as the socket. A longer flame tip may crowd a cover even when the base matches.

A listing described only as “Type B” leaves important details unresolved. Ask for the full shape code, base, voltage, and dimensions. B10 identifies a shape and nominal width; it does not automatically specify an E12 base.

Candle-shaped chandelier bulb beside its glass shade for a size check

How to Identify a Light Bulb With Missing Markings

When the printing has worn away, build a short identification record. Start with the fixture's brand and model, then add the removed bulb's base measurements and dimensions. A matching bulb elsewhere in the same fixture can provide clues, but confirm it against the fixture instructions.

Photographing a removed bulb base to help identify an unmarked light bulb

Take Three Useful Photos

Photograph the entire bulb beside a ruler, the base straight on, and any remaining markings. Keep the bulb level with the ruler so perspective does not exaggerate its size.

A photo-based light bulb finder can suggest a shape or fitting. A picture alone cannot confirm voltage, electronics, or enclosure approval. Send the photos and fixture model to the manufacturer when those details remain unknown.

Confirm Compatibility Before Choosing a Replacement

Voltage and Power Supply

MR16 is a useful example of why appearance is insufficient. Manufacturers offer both 12V GU5.3 versions and 120V GU10 versions in this general reflector form. Read the specific bulb's voltage. Low-voltage LED replacements also need the correct AC/DC supply and compatibility with any existing transformer.

Actual Watts, Lumens, and Color

Compare actual watts with the fixture's wattage limit. “60W equivalent” on an LED package refers to a brightness comparison. The FTC explains that lumens measure light output; around 800 lumens is a familiar replacement target for a traditional 60W incandescent.

To preserve a room's appearance, record the old bulb's Kelvin rating and finish too. A clear replacement can look sharper inside an exposed shade than a frosted one. Our LED vs. incandescent comparison explains what changes when you switch technologies.

Controls and Operating Conditions

Check for dimmers, three-way switches, enclosed covers, outdoor exposure, or specialty operating temperatures. These requirements can eliminate an otherwise convincing match. For dimming, use a dimmable bulb with a compatible control; GE's dimming guidance explains why ordinary non-dimmable LEDs are unsuitable for dimmer operation.

Search an exact model number first. If it is discontinued, use a specification-based query. For example:

  • E26 A19 LED 120V 800 lumens 2700K
  • E12 B10 LED 120V dimmable clear
  • GU5.3 MR16 LED 12V AC/DC 3000K

These illustrate search formats, not universal replacement recommendations. Add your verified requirements, then open the specification sheet. Marketplace titles often omit dimensions or combine multiple variants.

Keep One Replacement Record per Fixture

Save a note such as: “Hallway sconce: manufacturer/model, base, voltage, maximum actual watts, bulb dimensions, lumens, Kelvin, dimmer model, enclosure requirement.” Fill it using the labels and confirmed specifications.

For wall sconces with replaceable bulbs, check the cover can close correctly. Try one approved replacement before buying a matching set, and judge its light from the hallway or seating position where it will be seen.

Warm hallway wall sconce after checking replacement bulb fit and specifications

Specialty Bulbs Need More Than a Shape Match

U-shaped fluorescent light bulbs and straight tubes: Record the full lamp code, length, tube diameter, and end connections. For U-shaped lamps, include leg spacing. An LED conversion also requires the correct electrical arrangement. Philips' tube specifications distinguish compatibility with existing ballasts from mains-powered installation. Have required wiring changes handled by a qualified electrician.

Appliance lamps and integrated LEDs: Use the appliance or fixture model to locate an approved replacement. A matching screw base does not establish suitability for an oven, and a sealed LED module may require a manufacturer-specific part.

Base adapters and extenders: A simple light bulb base adapter changes the connection without converting voltage. An extender moves the bulb farther out. Both can change clearance and positioning; neither increases the fixture's permitted wattage. Confirm the complete arrangement is allowed before using one.

A successful bulb match leaves you with both a confirmed electrical fit and the light you intended. Save the replacement's model number once it works well; the next search will be much shorter.

Frequently Asked Questions

How Do I Identify a Light Bulb With No Markings?

Measure the removed bulb's base, overall length, and widest diameter, then compare the base and shape charts. Use the fixture model or manual to confirm voltage and permitted bulb type before ordering.

What Is the Standard Light Bulb Base in the US?

E26, a medium screw base with a nominal diameter of 26 millimeters, is common in US household lighting. Decorative and specialty fixtures may use other bases, so check the fixture label.

Are A19 and E26 the Same Thing?

A19 describes a bulb's shape and nominal width. E26 describes its screw base. A bulb can be both A19 and E26; each code answers a different identification question.

Can I Replace an E12 Bulb With an E14 Bulb?

E12 and E14 have different nominal screw diameters. Use the exact base specified for the fixture, and verify the replacement bulb's voltage and other ratings.

Does MR16 Always Mean a 12-Volt Bulb?

No. MR16 describes a reflector form and nominal diameter. Products are available with different bases and voltages, so confirm the base, voltage, and any transformer requirements separately.

Can a Photo-Based Light Bulb Finder Confirm Compatibility?

A photo can narrow down the shape and base family. It cannot reliably confirm hidden electrical specifications, dimming compatibility, or enclosure suitability. Verify those details using labels and manufacturer documentation.

Will a Light Bulb Base Adapter Solve a Size Mismatch?

A simple adapter changes the physical connection; it does not convert voltage or increase the fixture's wattage allowance. It also changes bulb position and clearance. Use one only when the complete arrangement is approved for the fixture.

Bestselling Product Recommendations

Glass Small Table Lamp Modern Nordic Four Legged Accent Lamp

Glass Small Table Lamp Modern Nordic Four Legged Accent Lamp

$149.99

6/8-Light Candlelight Wagon Wheel Chandelier with Glass Shades

6/8-Light Candlelight Wagon Wheel Chandelier with Glass Shades

$973.99

American style Swing Arm Wall Lamp with Fabric Shade Iron Light

American style Swing Arm Wall Lamp with Fabric Shade Iron Light

$159.99